Original
By certification 
Introduction:
Hemodialysis water treatment system purified water is in compliance with registered enterprise product standards, USA AAM/ASIO standard and YY0572-2015 Standard. System design strictly compliance with YY0793-2010 standard .
1. Dissolved salt removal rate of >98%
2. Bacteria and Endotoxin removal rate >99 %
3. The water recovery rate is more than 70%
4. System emptying rate ≥99%, no dead space
Hemodialysis Water Treatment System component:
Mutimedia filter: Automatic control. Its to reduce water turbidity and remove suspended solid impurities.
Activated carbon filter: Automaitc control, its to adsorbing residual chlorine and organic matter in water.
Softener filter: Automatic control. Its to remove calcium and magnesium ions and reduce water hardness.
Precision filter: precision treatment of impurities in water, deep filtration to improve the feed water quality of RO membrane.
Reverse osmosis unit: Double-stage RO treatment, no dead space, effective removal of ions and bacteria in water.
Models
Model |
Capacity |
Feed for dialysis machine |
Moldialysis50D |
50 |
1 |
Moldialysis125D |
125 |
2 |
Moldialysis250D |
250 |
3-4 |
Moldialysis500D |
500 |
5-10 |
Moldialysis750D |
750 |
11-15 |
Moldialysis1000D |
1000 |
15-20 |
Moldialysis2000D |
2000 |
30-40 |
Moldialysis3000D |
3000 |
50-60 |
Double stage RO module | ||
Advantages
● One-button chemical disinfection, the heat sterilization is also available based on customer demand.
● The equipment has a built-in timing flushing program, RO membrane anti-scaling program, and RO membrane flushing function.
● The water system is automatically flush and clean the reverse osmosis membrane when machine is powered on/off.
● Multiple emergency control measures can be used to switch the first and second stage RO
separately to ensure normal use of the equipment.
● The system has automatic protection functions, such as water stop, power failure, overload, high and low voltage automatic protection to ensure equipment safety.
Hemodialysis Water Treatment System photos:
FAQ
Q: What’s your payment terms?
A: Usually we accept TT, LC and by cash.
Q: Do you have OEM services and can you produce the machine as per our drawings?
A: Yes, and our engineer will give suggestions if the drawing has problems.
Q: How to install the machine after I received?
A: We will send engineers on site to make the installation, and also we can guide installation by video.
Q: How much cost of the field installation?
A: 100USD/Person/Day
Q: How to guarantee the quality of the machine I bought?
A: Each set before delivery, it will take photos and videos for quality check, and all machines provide one year warranty and life long technical support.
http://www.mole-water.com/
