Features:

Fabricated stainless steel impellers and diffusers for corrosion resistance.

Heavy duty stainless steel structure to assure permanent alignment of all the components in order to increase run time and trouble-free operation.

Stainless steel components, nitrile rubber fluted bearing to ensure durability against wear for long-lasting constant performances and product reliability.

Built-in check valve to protect the pumps against water hammer risk

The hydraulic design is such to enhance the overall efficiency thus reducing energy consumption and making the pumping systems more cost effective

Applications:

Irrigation

Household water supply

Pressure boosting

Industrial applications

Fountains

Sprinkler system

Gardening

Rural and civil water supply

Non-aggressive, non-explosive, pure cold, fresh water without abrasive particles having the following characteristics:

PH: 6.5-8.5

Turbidity: 50 ppm silica scale Max

Viscosity: 1.75*1000000 square meters per second Max

Hardness (drinking water): 300 Max

Specific gravity: 1.004 Max

Allowable solids: 3000 ppm Max

Chlorine ion density: 500 ppm Max

Permissible amount of sand: 50g/cbm Max

Temperature: 33 C degree/NBR; 90 C degree/Viton

Pump materials:

Part material

pump body: AISI 304

Impeller: AISI 304

Diffuser: AISI 304

Delivery door: AISI 304

Suction support: AISI 304

Shaft: AISI 304

Coupling: AISI 304

Check valve: AISI 304

Bearing: wear resistance rubber

Using a floating seal ring between chambers providing a nearly perfect seal, internal leakage caused by pressure differentials within the pumps was minimized.

FAQ

Q1: Are you a factory or trading company?

A: We are a deep well submersible manufactory.

Q2: Do you have any MOQ requirements?

A: Our MOQ is a full 20ft container

For the first time cooperation, we accept trial sample order for customer checking quality

Q3: What is the delivery lead time:

A: Generally, 20-30 days after receiving deposit. For some very urgent orders, we can however, get it finished for shipment within 10 days

Q4: What is the payment terms:

A: Generally, 30% deposit T/T and balance 70% T/T against Bill of Lading copy. D/P, L/C can be negotiated.

Our Services

1. Accept OEM.

2. 1-year quality warranty from ETD with technology support

3. Promise that produce the quality products and meet the customer requirements

After sale service

1. During the warranty time can replace a new one.

2. Our engineer and sales team can visit our core agent for promotion

http://www.cnjaphethpump.com/