Drill Collar
Drill Collar is shorted for DC. It is the basic component in the BHA which provides weight on the bit for drilling and keeps the drill string in tension.
Material: AISI 4145H Mod.
Type: Slick Drill Collar, Spiral Drill Collar and Non-Magnetic Drill Collar
Standard: API, NS-1
Hard Banding: Arnco 100XT, Arnco 300XT, TCS-8000, etc.
Length: 9150--9450 mm
Slip and elevator grooves, hand banding could be produced as per the customers’ requirements.
Function:
1.To increase the weight on the drilling bit
2.To ensure the necessary strength of compression
3.To reduce the vibration of the drill bit, swing, and beating, so that the drill bit working smoothly
4.To control the deviation
Please specify when ordering:
●Drill collar OD and ID;
●Overall length;
●Connections required (size and type);
●Type: Slick Drill Collar, Spiral Drill Collar or Non-Magnetic Drill Collar
●Stress relief groove
●Slip and / or Elevator Recess
●Hard banding
Technical Parameters--Drill Collar
Number and connection table |
Outside Diameter |
Inside Diameter |
Length mm |
Bevel Diameter mm |
Bending Strength Ratio |
||
mm |
in |
mm |
in |
||||
NC23-31 |
79.4 |
3 1/8 |
31.8 |
1 1/2 |
9150 |
76.2 |
2.57:1 |
NC26-35(2 3/8 IF) |
88.9 |
3 1/2 |
38.1 |
1 1/2 |
9150 |
82.9 |
2.42:1 |
NC31-41(2 7/8 IF) |
104.8 |
4 1/8 |
50.8 |
2 |
9150 |
100.4 |
2.43:1 |
NC35-47 |
120.6 |
4 3/4 |
50.8 |
2 |
9150 |
114.7 |
2.58:1 |
NC38-50(31/2IF) |
127 |
5 |
57.2 |
2 1/4 |
9150 |
121 |
2.38:1 |
NC44-60 |
152.4 |
6 |
57.2 |
2 1/4 |
9150 or 9450 |
144.5 |
2.49:1 |
NC44-60 |
152.4 |
6 |
71.4 |
2 13/16 |
9150 or 9450 |
144.5 |
2.84:1 |
NC44-62 |
158.8 |
6 1/4 |